Atom Full Beam Cutting Press Model S677

Employing all of the advantages of the series 6 the BP version is fitted with a cutting belt and a ‘pinch & grab’ clamp system. This enables the transportation and cutting of thick and multi-layer materials, both in roll and sheet form. With Atom’s comprehensive and accurate nesting software up to 20 cutting cycles per minute is possible, completed using maximum speed against best possible yield.
BP Powered Roller
All models in the BP series are equipped with mechanical stops, to ensure micrometric adjustment of the cutting depth.
Additional optional devices available are:
- Extension of the ‘take off’ unloading surface of approx. 900mm
- Cutting pad, moved by the rear clamp, this option is effective where deep penetration into the belt is required to cut the material, therefore making a cutting belt to expensive to use in such an application
- Electrically controlled die tool guides, this option allows the quick change of die as the guides are quickly moved to the width of the new die board, automatically centring if required
MODEL | CUTTING SURFACE (mm) | CUTTING POWER (t – kN) | STROKE (mm) | MAX DAYLIGHT (mm) | CUTTING SPEED APPROACH – CUT – RETURN (mm / sec) |
---|---|---|---|---|---|
S 6110/2L | 2000 x 1320 | 100 – 981 | 200 | 205 | 251 – 17 – 216 |
S 6165/1 BP | 1600 x 1050 | 150 – 1471 | 140 | 145 | 167 – 11 – 144 |
S 6110/2L BP | 2000 x 1320 | 100 – 981 | 200 | 205 | 251 – 17 – 216 |
S 6110/1 BP | 1600 x 1050 | 100 – 981 | 200 | 205 | 251 – 17 – 216 |
S 677/1 BP | 1600 x 800 | 70 – 686 | 200 | 205 | 251 – 24 – 261 |
S 6165/1 | 1600 x 1050 | 150 – 1471 | 140 | 145 | 167 – 11 – 144 |
S 6110/1 | 1600 x 1050 | 100 t – 981 | 200 | 205 | 251 – 17 – 216 |
S 677/1 | 1600 x 800 | 70 – 686 | 200 | 205 | 251 – 24 – 261 |
S 3110/2L | 2000 x 1320 | 100 – 981 | 300 | 330 | 251 – 17 – 216 |
S 3110/1 | 1600 x 1050 | 100 – 981 | 300 | 330 | 251 – 17 – 216 |
We believe in offering a remarkable service to our customers, want to find out more?
FOLLOW US
QUICK LINKS
NEWS & INSIGHTS
Out latest installation in Scotland of one of our Atom SE25L Clicker Presses used in the cutting and production of promotional gifts. The site had limited access and other issues so Cutting Systems used our own moving equipment to complete the installation. Reactive After-sales is covered by our local engineer and preventative maintenance is covered…
ADDRESS & CONTACT
01933 359 359
Units 25 & 29 Francis Court
Wellingborough
Rushden
Northamptonshire
NN10 6AY
© Copyright 2018, Cutting Systems UK Ltd. All rights reserved. Designed by Creatively Yours